Brax 2400.2 GE Power Amplifier

Brax GE

BRAX 2400.2 GRAPHIC EDITION power amplifier, "Graphic Edition" to pursue additional high output and high quality based on the basic concepts of X2000.2/X2400.2, improvements and manual selection of power supply devices with specially designed, made patterns and strengthening of the Board The special models were tuned.

Switching power supply device for MOS-3 parallel drive of the FET, a large toroidal transformer shield covers specifications, di-bridge circuit, and constitute a more powerful power supply unit with a custom combine the large capacity condenser.

MOS-final pairing of the FET devices is performed using a screening instrument with 300 items, and a balanced push-pull circuit.

Despite using a print pattern Thick, high-current lines are distorted when high output is suppressed to enhance the pattern of silver wire.

The input section uses an IC operational amplifier manufactured by Burr-Brown. This higher resolution has achieved outstanding sound localization.

Heatsink design is extended to cover the connection terminals, fixed body design after all wiring.
Color sink "Graphic Edition" you can choose from platinum or chrome color only.
The amplifier supports an optional spacer to produce a more upscale.
Amplifier configuration has two models of spacers chrome and gold.

Main specifications :

• Channel mode: 2ch/3ch/4ch
• Output Power: 135W × 4ch 4ΩStereo
• 234W × 4ch 2ΩStereo
• 470W × 2ch 4ΩMono
• Frequency Response: 20 to 20KHz
• THD: 0.001%
• Ratio SN: 110dB or more
• Built CrossOver: Independent Expression HP / LP
• 12dB, switchable 24dB/oct
• 15 to 4.5KHz
• Input sensitivity: 0.3V ~ 7.5V
• Input impedance: 10KΩ
• Damping Factor: 400
• Comes with an external fuse: 100A × 1
• Dimensions (W × H × D): 238 × 53 × 473 (mm)
• Weight: 8.2Kg

Posted in: car audio,power amplifier