 |
| Audison Bit Ten |
Audison bit Ten is a multi-function digital processor featuring analog
input, capable of transforming ordinary OEM or after-market system into a
high-performance system.
 |
| Audison Bit Ten With OEM System |
 |
| Bit Ten OEM Head unit High Input Setup |
 |
| Bit Ten OEM Original Amplifier High Input Setup |
 |
| Bit Ten OEM/After Market Head Unit Setup |
Provided with a 32 bit, 147 MHz clock speed
DSP as well as 24 bit A/D and D/A converters, bit Ten is controlled by a
software especially developed for signal treatment according to the
vehicle acoustic peculiarities.
Setting the parameters of each input single channel, setting the delays according to the listening position, adjusting crossovers and equalizers for each of the 5 output channels; all of these operations can be managed by the PC.
 |
| Bit Ten Software Interface |
During the
installation phase, after converting the analog signal into digital, bit
Ten automatically reconstructs a digital full-bandwidth stereo signal;
de-equalizes the frequency response and, if necessary, reconstructs the
central and subwoofer channels.
The user can configure the output mode of each channel relative to the installed system.
 |
| Bit One Front Rear + Sub Setup |
 |
| Bit Ten 2 Way Active Front + Sub |
It is designed to be connected with the DRC, Digital Remote Control (Optional).
Bit Ten Specification :
POWER SUPPLY
- Voltage 11÷15 VDC
- Idling current 0,4 A
- Switched off without DRC 2,5 mA
- Switched off with DRC 4 mA
- Remote IN voltage 7÷15 VDC (1.3 mA)
- Remote OUT voltage 12 VDC (130mA)
SIGNAL STAGE
- Distortion - THD @ 1kHz, 1VRMS Output 0,005%
- Bandwith @ -3 dB 10÷22 kHz
- S/N ratio @ A weighted
- Master Input 95 dBA
- Aux Input 96 dBA
- Channel Separation @ 1 kHz 85 dB
- Input sensivity (Speaker In) 2÷15 V RMS
- Input sensivity (Aux In) 0,6÷5 V RMS
- Input sensivity (Phone) 2÷15 V RMS
- Input impedance (Speaker In) 2,2 kΩ
- Input impedance (Aux) 15 kΩ
- Input impedance (Phone) 2,2 kΩ
- Max Output Level (RMS) @ 0.1% THD 4 V RMS
INPUT STAGE
- High Level (Speaker) FL FR RL RR, Phone IN
- Low level (Pre) AUX IN
OUTPUT STAGE
- Low level Pre (default) FRONT L/R, REAR L/R, SUB
CONNECTION
- From / To Personal Computer 1 x USB / B (1.1/2.0)
- Filter Type Full / High Pass / Low Pass / Band Pass
- Filter mode and slope Linkwitz@12/24dB/Butterworth@6/12/18/24dB
- Crossover frequency 68 steps@ 10÷20 k Hz
- Phase control 0°÷180°
EQUALIZER
- On Hi Levels input (Speaker In) Automatic De-Equalization
- On Outputs N.5 Graphic: ±12dB@ 31Band ISO 1/3 Oct 20÷20kHz
TIME ALIGNMENT
- Distance 0÷510 cm / 0÷200.8 inch
- Delay 0 ÷ 15 ms
- Step 0.08 ms; 2.8 cm / 1.1 inch
- Fine set 0.02 ms; 0.7 inch / 0.27 inch
SIZE
- W (Width) x H (Height) x D (Depth) mm/inch 191 x 34 x 131 / 7.51” x 1.33” x 4.76”
- Weight kg/lb 0.6 / 1.322
0 comments:
Post a Comment