Helix C-DSP Audio Mobil Processor |
The
C-DSP is designed for highest sound quality without compromise from
the inputs to the outputs. Not one but two audio processors with 56-bit
resolution ensure loss-free signal processing and the finest A/D and
D/A converters otherwise used only in studio technology guarantee
previously unheard-of signal-to-noise ratios and THD values. The loving
attention to detail in the hardware is just as obvious as it is in the
software. The intuitive user interface does without all the gimmicks
to focus all the more on extremely precise setting options that are
certain to make the heart of any sound enthusiast beat faster.lassen.
Highlights:
Highlights:
- Windows interface – communication via USB 2.0
- MicroSD slot to upload DSP settings without having to connect the DSP to a PC
- • TwinPower – two audio DSPs with 56-bit resolution for optimal sound properties and maximum computing power
- Future-oriented hardware features for virtually unlimited expansion options
- Freely configurable inputs and outputs
- Graphical 30-band EQ per channel with the “fine adjustment” of the individual bands in 1/24 octave steps and a quality setting between 0,5 and 15, time correction in 7-mm steps, all established filter characteristics are available and much more
- Inputs: 8 x RC A, 8 x high-level, 1 x optical, 1 x control input, MicroSD and USB
- Outputs: 8 x RC A and remote output
- Input sensitivity adjustable
- High-end AD & DA converter
- Start/stop capable down to 6 volts
- Dimensions: 190 x 190 x 42 mm
- Compatible with the HELIX Optical & Bluetooth Interface, which will soon go on the market – this makes it possible to operate the system using a Smartphone and to configure it with a PC
Specification :
Inputs | 8 x RCA 8 x High level speaker inputs 1 x Optical input - SPDIF-Format(6 - 192 kHz Sampling Rate) 1 x Remote In |
Input sensitivity | RCA 1 - 6 Volt High level 2 - 20 Volt |
Outputs | 8 x RCA 1 x Remote Out |
Output voltage | 6 Volt |
Frequency response | 10 - 22.000 Hz |
DSP resolution | 56 bit |
DSP processing power | 2 x 172 MHz |
DSP type | Audio signal processor |
Number of DSP processors | 2 |
Signal converter | A/D: Asahi Kasei D/A: Cirrus |
Signal-to-Noise ratio- digital input | 114 dB |
Signal-to-Noise ratio - analog input | 114 dB |
THD | 0,001 % |
Operationg voltage |
9,2 - 18 Volt (max. 5 sec. down to 6 Volts) |
Dimensions (H x W x D) | 190 x 190 x 42 mm |
1 comments:
Hello im planning an extensive system consisting of: three way fronts ( 6", 5 1/4" and 1" tweeters) for rear sound either 4-6" midbass or 4-8" midbass drivers and a 12"sub an an audi tt.My amps are ZED amps A liviathon 6 by 150 at four ohms for the front, a Zed dreadnaught 4 by 150 4 ohms for the rear and a Zed minotaur 1 by 750 again at ohm.
i am looking for signal a processor that i can run frum 10hz all the way upto 20-30k hz and can overlap?!?!?
i would like to run my sub at 10-50hz and my rear 6"or 8" midbass at 40hz to 100hz then for my front 3 way stage the 6" mids to run at 80hz to 400zh then the 5 1/4" 350hz to 4k then the tweeter the rest of the way up. ive looked at audio control and it is great products and i have a great pleasurable history with them but to accomplish what i want out of this system it will require ALOT of pieces... will a Helix C dsp do what i need done?
Post a Comment