Audiocontrol DQXS |
The
six inputs on the DQXS allow it to interface with a multitude of
source units, whether they have two, four, our six output channels. The
DQXS’s programming menu actually allows a user to select an input
configuration that optimizes the systems performance. Additionally, the
DQXS is equipped with high impedance inputs, which means it can accept
high wattage signals from most factory installed source units and
amplifiers.
The
DQXS begins with AudioControl’s full compliment of equalization
controls. The front and subwoofer channels offer precise, one-third
octave spaced constant-Q equalization for each channel plus two
completely programmable parametric equalization controls. The rear
channels also have two completely independent parametric equalizers plus 19 one-half octave spaced controls per channel. All told, the DQXS offers users a total of 142 equalization filters! Additionally
AudioControl has equipped the DQXS with a full 3-way electronic
crossover. A user has the ability to send signals to front highpass,
front bandpass, rear highpass and subwoofer outputs. An exclusive
AudioControl feature, the Programmable Frequency Match ( PFM ) subsonic
filter is also provided to minimize any infrasonic signals from
compromising the performance of the system. Given that the DQXS is
digitally controlled, a user can easily select crossover points in
precise 1/12-octave increments
All crossovers and equalization settings can be saved and or recalled by a user from one of eight non-volatile memory locations. Optionally, the DQXS can be operated from the drivers seat or other location using AudioControl’s DDC (Digital Dash Control) which is sold separately. Released earlier this year, the DDC is a DIN shaped control that allows remote operation of most AudioControl digital processors. One of the best choice for your car audio processors.
DQXS SPECIFICATIONS :
All specifications are measured at 14.4 VDC (standard automotive voltage). As technology advances, AudioControl reserves the right to continuously change our specifications like our weather.
Maximum input level 7.5 Vrms
Maximum output level 7.5 Vrms
Output gain +/- 10dB
Frequency response 10Hz-22kHz
Total harmonic distortion 0.01%
Signal to Noise ratio 105dB
Balanced input noise rejection 60dB
Input Impedance 20k Ohms
Output Impedance 150 Ohms
Crossover slope 24 dB/octave
Crossover type 3-Way Linkwitz-Riley
Crossover frequencies 110 1/12th octave increments
PFM subsonic filter slope 24 dB/octave
Graphic Equalization Controls Front - 30 bands, 1/3 octave 25 Hz - 20 kHz
Rear - 19 bands, 1/2 octave 32 Hz - 16 kHz
Sub - 16 bands, 1/3 octave 25 Hz - 800 kHz
Parametric Equalization Controls 2 bands, 25 Hz - 20 kHz , Adjustable Centers
Parametric Equalization Bandwidth 1/12 to 3 octaves
Equalization boost/cut +/- 12 dB
Power supply High headroom PWM switching
Power draw 600mA
Recommended fuse rating 2 Amp
Size 11” W x 7.2”D x 1.25”H
Weight 4.5 lbs.
Audio Control Configuration :
Basic DQXS Configuration |
Six Channel DQXS with DDC |
Four Channel DQXS System |
Two Channel DQXS System |
DQXS With OEM Head Unit |
0 comments:
Post a Comment